STS Cranes — Oryx General Trading FZE LLC

Technical Specification
General
Item Specification Equipment Type: Rubber Tyred Gantry Crane (RTG)
Manufacturer: ZPMC
Type: Hybrid RTG
Rated Load: (Under Spreader)40 t
Electrical Drive: SystemEZ – Siemens
Diesel Engine: Cummins QSX15-G8
Generator: Stamford HCI-634J1
Main Performance Parameters
ParameterSpecification
Hoisting Speed – Rated Load26 m/min
Hoisting Speed – Spreader Only52 m/min
Gantry Travel Speed – Rated Load25 m/min
Gantry Travel Speed – Spreader Only130 m/min
Trolley Travel Speed70 m/min
Spreader Skewing Angle±5°
Spreader Trimming Angle±3°
Horizontal Fine Positioning (Trolley Direction)±250 mm
Horizontal Fine Positioning (Gantry Direction)±250 mm
Maximum Wheel Load<18 tSpan26.55 m
Wheel Base 7.6 m
Trolley Gauge 6.9 m
Lifting Height18.05 m
Trolley Working Travel Range21.5 m
Installed Motor Power
Function Power Hoist Motors2 × 95 kW
Gantry Motors 4 × 30 kW
Trolley Motors4 × 7.5 kW
Available Units & Utilization Data on request
Documentation References
- General Arrangement Drawing Available
- Utilization & Operational Data Available
Source Documents:
Type: Telescoping single-lift mobile harbour crane spreader Container sizes: 20 ft / 40 ft
Safe working load: 41 metric tons Tare weight: approx. 9.0 tons
Gravity point adjustment: ±1,200 mm Telescope speed: 20 ft to 40 ft in approx. 30 sec Flipper configuration: 6 side flippers
Twistlocks: ISO floating twistlocks, 6 mm floating capacity Power supply: 400/230 VAC, S0 Hz
Max power consumption: 12.9 kW Control voltage: 24 VDC
Hydraulic system pressure: 100 bar
Bromma YSX40E — Relay Control Datasheet
Spreader type: YSX40E
Type: All-electric yard crane telescopic spreader
Container range: 20 ft & 40 ftSWL41 tonnes evenly loadedEccentric load capacity41 tonnes ±10%
Tare weightApprox. 5.7 t standard, but one relay manual example lists 6.0 t depending on options
Telescoping: 20 ft to 40 ft
Telescoping time Approx. 25–30 sec
Twistlock rotation90° in approx. 1.5 sec
Operating voltage400 VACFrequency50 Hz
Control voltage230 VAC
Electrical cabinet protection: IP65
Motor protection: IP56Control systemRelay-based
Wiring diagram eferenceBR1706963Telescopic motor output3 kWTwistlock motor output0.37 kWMax simultaneous power3.74 kWDesign standardsEN13001, DIN 15018 H2B4, FEM 1.001, BS 2573
The relay-specific manual example states the control system is Relay and the electrical wiring diagram number is BR1706963. It also lists 400 VAC / 50 Hz, 230 VAC control voltage, 3 kW telescopic motor, 0.37 kW twistlock motor, and 3.74 kW max simultaneous power.
RAM 3530 is the heavy-duty 20/40 ft all-electric telescopic yard crane spreader from the RAM 3500 series.
RAM 3530 — Datasheet Summary
ItemSpecification
Manufacturer: RAM
Spreaders Model: 3530
Series: 3500
Series Application: Yard stacking crane / RTG / RMG
Spreader Type: All-electric telescopic single-lift spreader
Container sizes1 x 20 ft / 40 ft
SWL / capacity: 41 tonnes
Structure: Heavy Duty StructureFlippers / guides: Fixed gather guides
Control: From crane cabin
Hydraulic system
None — all-electric design
Main use: Container yard operations
Comparable model: RAM 3510 is lightweight 20/40 ft; 3530 is heavy-duty 20/40 ft

PRE-OWNED ZPMC RUBBER TYRED GANTRY CRANES (RTG

Bromma EH5U 2008 90 Working Hours

Bromma YSX40E 2012 Never Used

RAM 3530 Yard Spreader Never Used

Contact Us